ultrasonic mosquito repellent

how it works

mode

• Standby mode: Time display and ultrasonic operation are off
• Ready mode: Time display is on (Change by pressing the setting button briefly in standby mode or operation mode) Operation mode: Ultrasound is in operation (The operation notification light blinks every 5 seconds)
• mosquito repellent function

Action step

It can be set in 3 steps in total.

• -1 stage: frequency 62Hz
• -Step 2: Frequency 34Hz, 50Hz, 154Hz
• -Step 3: Frequency 20KHz~70KHz

How to set

- In ready mode, press the set button to change the steps sequentially
can (Ultrasound OFF-> Step 1 Step 2 Step 3 Step 3 Ultrasound OFF) -If about 8 seconds pass without pressing the setting button, the time display turns off and it switches to standby mode or operation mode. ※It is recommended to use it indoors for step 1 and outdoor use for steps 2 to 3.

how it works

time setting

How to set - In ready mode, press the set button for about 3 seconds to switch to setup mode It's possible. - In each step of setting mode, press the setting button for 3 seconds to set the next mode is switched.

setup mode

-Time display unit: short press the setting button to display 12 or 24 method can be selected -Time: Short press the setting button to change the number from 1 to 24 (1 to 12) -Minute: Press the setting button briefly to change the number from 1 to 59 ※Press and hold the setting button for 3 seconds in the minute setting step to prepare mode and the time setting is completed. (Or it automatically switches to ready mode after about 8 seconds after finishing the setting.)

setup mode

Separate the body from the band or case and place it at the bottom of the setting button. Connect the charging port to the charger. The charging notification light blinks while charging, and lights up when charging is complete. state is switched. •It takes about 30 minutes to fully charge, and it can be used for up to 130 hours continuously. •It can be charged with a micro 5-pin charging cable (5V/2A or less).

caution

• Do not block the ultrasonic generator while the product is in operation.
• Connect the body and the silicone band exactly to the groove. If they are connected incorrectly, the body may come off.
• Do not pull or stretch the silicone band forcibly. ㆍDo not put the product in water or activities such as showering or swimming.
• Don't do it. It may cause product malfunction. * In case of product failure due to water immersion, return or exchange is not possible.